Honeywell Xenon 1910 - RS232 Word Length: Data Bits, Stop Bits, and Parity

2 - 19
RS232 Word Length: Data Bits, Stop Bits, and Parity
Data Bits sets the word length at 7 or 8 bits of data per character. If an application requires only ASCII Hex characters 0
through 7F decimal (text, digits, and punctuation), select 7 data bits. For applications that require use of the full ASCII set,
select 8 data bits per character. Default = 8.
Stop Bits sets the stop bits at 1 or 2. Default = 1.
Parity provides a means of checking character bit patterns for validity.
Default = None.
1200
2400
4800
9600
19200
38400
57,600
* 115,200
7 Data, 1 Stop, Parity Even