Honeywell XIO-CIM-S User Manual

MOUNTING AND WIRING INSTRUCTIONS
31-00360-01
XIO Family of Spectrum System
Remote Input/Output Devices
INTRODUCTION
The SpectrumXIO family of devices are intended to be
replacement devices for the original Novar Legacy
Spectrum Rack Input and Output modules that have been
previously installed. These modules include the following
modules: Rack Input Module, Rack Output Module,
Compressor Output Module, Condenser Control module,
Analog Output Module, Case Input Module 2, and 8-Input
Module.
Fig. 1. XIO Output device with HOA switches.
Fig. 2. XIO family of Spectrum System Remote I/O (for reference only).
Contents
Introduction .................................................................................. 1
Specifications ............................................................................... 3
Mounting ........................................................................................ 4
Wiring .............................................................................................. 5
Spectrum Network Wiring ....................................................... 8
Setting MAC Address and Mode Select Switches .......... 8
Model and Part Numbers ........................................................ 10
Regulatory Compliance ............................................................ 16

Honeywell XIO-CIM-S Specifications

General

Brand	Honeywell
Model	XIO-CIM-S
Category	I/O Systems
Language	English

Summary

Introduction to XIO Devices

XIO Device Specifications

Safety Precautions and Mounting

Mounting XIO Devices

Instructions on how to mount the XIO device on DIN-rail or panel.

DIN Rail Mounting Procedure

Detailed steps for mounting the device on a DIN rail.

DIN Rail Removal

Steps to remove the XIO device from a DIN rail, including caution.

Panel Mounting Instructions

Guidelines for physically attaching the XIO device to a panel.

XIO Device Wiring

Wiring Method Details

Details the acceptable wire gauges and multiple wire termination rules.

Spectrum Network Wiring

Describes how to connect XIO devices to the Novar Spectrum network.

Setting MAC Address and Mode

Model and Part Number Information

Maintenance and Replacement

Information regarding maintenance and replacement of XIO modules.

ROM Module Replacement Guide

Compares Novar Spectrum ROM modules with XIO-ROM-S for replacement.

COM Module Replacement Guide

Compares Novar Spectrum COM modules with XIO-COM-S-H for replacement.

CCM Module Replacement Guide

Compares Novar Spectrum CCM modules with XIO-CCM-S-H for replacement.

AOM Module Replacement Guide

Compares Novar Spectrum AOM modules with XIO-AOM-S for replacement.

CIM2 Module Replacement Guide

Compares Novar Spectrum CIM2 modules with XIO-CIM-S for replacement.

8IMR/8IME Module Replacement Guide

Compares Novar Spectrum 8IM modules with XIO-8IM-S for replacement.

RIM Module Replacement Guide

Compares Novar Spectrum RIM modules with XIO-RIM-S/XIO-RIMCT for replacement.

Regulatory Compliance Information