Need help?Do you have a question about the Honeywell Pro-Watch 7000 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Pro-Watch 7000 |
| Category | I/O Systems |
| Language | English |
Compares the PW-7000 controller with the PW-6000 controller and lists compatible Honeywell modules.
Details the Ethernet and RS-485 ports on the PW-7000 controller and their mapping.
Describes the on-board real-time clock, memory storage, event log, and transaction storage capabilities.
Explains the configuration options for the PW-7000 jumpers, including termination and power settings.
Details the dual in-line package (DIP) switch settings for operating mode and communication parameters.
Provides instructions for erasing all configuration and cardholder data on the PW-7000 controller.
Lists the technical specifications for the PW-7000, including power, ports, cable requirements, and environmental factors.
Describes the power-up and initialization sequence, including LED indicators and potential issues.
Details how to properly supply 12 VDC power to the PW-7000 controller, emphasizing polarity.
Explains the Ethernet and RS-485 wiring for communication between the PW-7000 and the host.
Details the wiring for cabinet tamper and power failure inputs, used for monitoring and safety.
Explains the function of the backup battery for the event log and real-time clock, and replacement recommendations.
Guides on how to connect to the Access Control Device Server Manager (ACDSM) for initial system setup.
Describes the login screen for the PW-7000 web server and default credentials.
Explains the PW-7000 web server home page and its navigation links for configuration.
Details how to configure network settings, including dynamic or static IP address options.
Instructs on setting up dynamic IP configuration using DHCP for the PW-7000 controller.
Details the process of assigning a static IP address to the PW-7000 controller.
Explains how to configure host communication settings for primary and alternate ports.
Details the configuration for IP Server connection type for host communication.
Details the configuration for IP Client connection type for host communication.
Shows how to access and view the read-only hardware information of the PW-7000 controller.
Guides on adding, editing, and deleting user accounts and managing their privileges.
Explains how to restore the PW-7000 to its default factory or current operational settings.
Details how to apply configured settings and reboot the PW-7000 controller.
Instructions on how to log out of the PW-7000 web server interface.
Provides wiring diagrams and terminal settings for connecting readers to the PW-7000 controller.
Explains the configuration and wiring for input terminals, including supervised and non-supervised contacts.
Details the wiring and configuration of form-C relay outputs for controlling door strikes and other devices.
To Next Page
