Need help?Do you have a question about the Honeywell Xtralis FAAST FLEX FLX-010 and is the answer not in the manual?
General| Model | FLX-010 |
|---|---|
| Type | Aspirating Smoke Detector |
| Operating Humidity | 10% to 95% RH, non-condensing |
| IP Rating | IP30 |
| Number of Pipes | 1 |
| Detection Method | Laser-based particle detection |
| Power Supply | 18–30 VDC |
| Operating Temperature | -10°C to 55°C |
| Relay Outputs | 3 programmable relays |
| Communication | RS-485 |
| Approvals | UL, ULC, EN54-20 |
| Weight | 1.5 kg |
| Pipe Length | Up to 50 m |
| Sensitivity Range | 0.0015%/m to 20%/m |
Statement on FCC rules compliance for the device's digital components.
Lists regulatory requirements and notices specific to European installations.
Detailed explanation of the FAAST FLEX detector's components and functionality.
Guidelines for proper storage and handling of the FAAST FLEX detector during shipping.
Identifies and illustrates the major physical components of the FAAST FLEX detector.
Provides general product details, including power requirements and the information label.
Refers to the graphical instruction sheet for detailed installation procedures.
Instructions for installing the correct front panel label based on mounting orientation.
General rules and best practices for connecting the detector's wiring.
Information on the General Purpose Input (GPI) functionality and its configuration.
Details the functions of the specific buttons located under the detector cover.
Explains the initialization sequence performed by the device upon power-up.
Detailed steps for replacing the sensing module of the FAAST FLEX detector.
Solutions for problems encountered when connecting to the detector via Bluetooth.
To Next Page