20
3. Network → Internet, choose Wireless Access, click Scan to select the Wi-Fi, then leave the
password empty, click Save
4. Open another page of browser, the authorization page pops up, login with the username &
password
▲ Note: if the authorization page doesn’t pop up, please update the firmware. Please download
the firmware from the HooToo website:
http://www.hootoo.com/media/downloads/HooToo-TM02-Auto-jump-button-2.000.018.zip
▲ If you need instructions on how to upgrade the firmware, please refer to page 34.
After upgrading the firmware, please login 10.10.10.254, click Service, and select Auto-jump Service
before selecting off. Click Save
To Next Page
Loading...
Need help?
General
