Hootoo HT-TM02 TripMate Nano User Manual

39
3.5.3 Factory Default
There are two ways to reset TripMate Nano:
1. Hard Reset:
Use a needle-like object to press the reset button found next to the USB port; hold for 10 seconds
until the Wi-Fi indicator LED blinks, release it and wait for it to reboot.
2. Restore Factory Setting:
On the computer, click Reset Settings to Restore to factory default settings → Save, wait for it to
reboot.
▲ Note: This will reset all configuration settings to their default values.
The default SSID Name: TripMateNano-XXXX
The default SSID Password: 11111111(8 x 1’s)
The default User Name: admin
The default Password: blank (leave it empty)
All changed settings will be restored to their factory default settings

Hootoo HT-TM02 TripMate Nano Specifications

General

Brand	Hootoo
Model	HT-TM02 TripMate Nano
Category	Network Router
Language	English