Hoover CWGDH012 User Manual

10
MAINTENANCE
Remove the tanks and
lie the washer on its
back exposing the
SpinScrub brushes.
Leave the brushes
to fully dry before
reassembling. Push
the cover onto the
clips until they click
into place.
Firmly pull the sides of
the SpinScrub brushes
to remove.
Line up the spindle
and tabs on the side of
SpinScrub brushes into
carpet washer, push
firmly until it clicks
into place.
The SpinScrub brushes
can be removed and
cleared of any debris/
threads or hair.
Rinse under water to
remove debris.
Depress the clips to
release the SpinScrub
cover and firmly pull
the cover to remove.
CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks.
Cleaning the SpinScrub brushes
CWGDH012_Hoover MEA_Elite Power Scrub_Gladiator_UG_240818.indd 11 24/08/2018 11:47

Hoover CWGDH012 Specifications

General

Brand	Hoover
Model	CWGDH012
Category	Vacuum Cleaner
Language	English