EasyManuals Logo

Hoover F6210 User Manual

Hoover F6210
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Fill the solution tank
Unplug deep cleaner from
electrical outlet.
Press button (A) and remove solution
tank (Fig. 3)
Release latches (B) on tank cap and
remove (Fig. 4)
Use cap (Fig. 5) to measure the proper
amount of HOOVER detergent according
to the chart below:
Pour detergent into tank
Fill tank to fill line (C) (approx. 1 gallon) with hot tap
water (Fig. 6)
Replace cap. Secure both latches (B) (Fig. 4)
Place bottom of tank onto cleaner. Pivot top of tank and
snap in place (Fig. 7)
Amount of
Surface detergent Type of detergent
Carpet two HOOVER Carpet/
caps Upholstery Detergent
Upholstery one HOOVER Carpet/
cap Upholstery Detergent
For heavy traffic areas: Pre-treat with HOOVER Spot
and Stain Spray (available at additional cost if not
included with your model)
OR
Use 4 caps of Carpet/Upholstery detergent.
Caution: Detergents contain Anionic and Nonionic
Surfactants. Avoid contact with the eyes and skin. In case
of contact with eyes, flush with cold water for 15 minutes.
In case of contact with skin, wash with water. If irritation
persists, call a physician. For Medical Information (U.S.),
call 1-800-752-7869.
Continued
A
B
B
C
Deep Cleaner Basics
3
4
5
6
7
NOTE: For best results, use only Hoover detergents.
They are specifically formulated for use with your
SteamVac™ Deep Cleaner.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hoover F6210 and is the answer not in the manual?

Hoover F6210 Specifications

General IconGeneral
BrandHoover
ModelF6210
CategorySteam Cleaner
LanguageEnglish

Related product manuals