Hoover FH50210 - How to Use; Cleaner Description and Controls; Powering the Cleaner On;Off; Adjusting the Handle Position

6
STORE TOOLS
(Tools may vary)
1.8 Store Tools on
back side of cleaner as
shown.
Actual model may vary from images shown.
1.8
2. HOW TO USE
CLEANER DESCRIPTION
1. Hand Grip
2. Clean Surge Button*
3. SolutionTrigger
4. ON/OFF Switch
5. Wash/Rinse Setting Switch
6. SpinScrub
®
Hand Tool*
7. Carry Handle
8. Clean Water Tank
9. Detergent Container
10. Dirty Water Tank Handle
11. Dirty Water Tank
12. SpinScrub
®
Mode Selector*
13. Edge Cleaners*
14. Nozzle
15. Cord Hooks: Upper cord hook
rotates for quick cord release.
16. Hose
17. Stair/Upholstery Tool*
18. Handle Release Pedal
19. Non-Marring Wheels*
20. Hard Floor Squeegee Tool*
*Available on select models only. Accessories not included with
your model may be purchased separately by visiting www.hoover.
com, or your local HOOVER
®
service center.
3
5
1
4
2.1
2.2
2.3
ON-OFF SWITCH
HANDLE RELEASE PEDAL
To turn cleaner ON,
push button down.
To turn cleaner OFF,
push button again.
Step on pedal (A) to
lower handle to
operating position.
Handle does not lock
into a single position but
“floats” to allow
convenient operation.
A
6
7
8
9
10
11
12
13
14
15
16
18
19
20
2
17
A
B
C
A. Upholstery Nozzle*
B. SpinScrub
®
Hand
Tool*
C. Hard Floor
Squeegee Tool*
*Available on select
models only.