Hoover FloorMate Edge - Maintenance and Care; Emptying the Dirty Water Tank

1
4
2 3
To remove the
recovery tank, press
down on release
button and pull.
Place the bottom of the
recovery tank onto the
machine rst and click
the top into place.
Unclip latches on
recovery tank lid,
remove lid to empty.
Pour dirty water into sink.
Reattach lid to tank.
Emptying your FloorMate
®
Edge dirty water tank:
NOTE: The recovery
tank has an automatic
shut off to prevent the
tank from overowing.
If this is activated, the
machine will not pick
up and the sound of
the motor will change.
The recovery tank will
need to be emptied.
9