Why does my Hoover HandiVac 7.2 Vacuum Cleaner have weak suction?
Weak suction in your Hoover Vacuum Cleaner is often due to a full dust bin or blocked filters. Remove and separate the filter parts, then clean them thoroughly. Also, ensure the battery is fully charged.
What to do if my Hoover Vacuum Cleaner is not charging?
To ensure effective charging of your Hoover Vacuum Cleaner, make sure the power switch on the handheld vacuum handle is in the ‘OFF’ position. Also, check that the charging base is securely plugged into the power outlet and switched ‘ON’.
Why does my Hoover Vacuum Cleaner running time too short?
The running time of your Hoover Vacuum Cleaner may be shorter than expected because rechargeable batteries require a full charge to perform optimally. The charging light on the HandiVac should illuminate when charging correctly. Charge the device for at least 14 hours before the first use. For regular charging, a minimum of 8 hours is needed, but charging for 14 hours will ensure a full charge and maximum operating time.
General| Brand | Hoover |
|---|---|
| Model | HandiVac 7.2 |
| Category | Vacuum Cleaner |
| Language | English |
Initial setup and important precautions before operating the vacuum cleaner.
Essential safety instructions and tips for taking care of the appliance.
Instructions for using the charging base with 7.2V and 9.6V HandiVac models.
Instructions for using the charging base with the 14.4V HandiVac model.
Guidelines for operating the HandiVac 7.2 for dry cleaning tasks.
Instructions for using the HandiVac 9.6 and 14.4 for both wet and dry cleaning.
Procedure for emptying the dust compartment and cleaning the filters.
Routine maintenance for keeping the vacuum cleaner clean and functional.
Instructions for securely mounting the charging base on a wall.
Guide to assembling and utilizing the floor extension tool for the 14.4V model.
To Next Page
