Hoover HDP 2D945W-86 User Manual

Cold Water Connection
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the
risk of the water inlet to be blocked and damage the appliance.
Please close the hydrant after using.
WARNING! WARNING!
Water ConnectionWater Connection

Hoover HDP 2D945W-86 Specifications

General

Brand	Hoover
Model	HDP 2D945W-86
Category	Dishwasher
Language	English