Why is the suction performance of my Hoover HDSVI985B Ventilation Hood not good?
If your Hoover Ventilation Hood isn't providing good suction, the distance between the unit and the cooking plane might be too great. Readjust the distance to be between 65-75cm.
What to do if both the light and fan don't work on my Hoover HDSVI985B Ventilation Hood?
If neither the light nor the fan is working on your Hoover Ventilation Hood, start by checking the halogen light bulb. If it's burned out, replace it with a bulb of the correct rating. Also, ensure the power cord is securely plugged into the power supply.
Why is my Hoover HDSVI985B Ventilation Hood vibrating so much?
If your Hoover Ventilation Hood is vibrating excessively, it might be due to several reasons. The fan blade could be damaged, or the fan motor might not be tightly fixed. In either case, switch off the unit and have it repaired by qualified service personnel. Alternatively, the unit might not be properly hung on the bracket. To resolve this, take down the unit and verify the bracket's location.
Warning regarding proper earthing and potential risks of death, fire, or electrical shock.
Position and securely fix the hanging plate to the ceiling using appropriate screws.
Fix angle bars to the hanging plate and extend/fix them to the required height with overlap.
Connect the ducting hose to the ceiling adaptor and attach the upper chimney section.
Lift and securely fix the main body of the cooker hood onto the angle bars.
Connect electrical supply, check operation, adjust chimney, and fit carbon filter if needed.
Overview of standby mode, speed selection buttons (low, medium, high), and booster function.
Explanation of the function for controlling the unit's lamp.
Guidelines for general cleaning using mild soapy water and soft cloths.
Essential monthly cleaning of the grease filter to maintain efficiency and prevent fire risk.
Annual replacement of the activated carbon filter for recirculation units to trap odors.
Procedure for replacing the light bulb, noting it's sold as a complete part.
Diagnosing and resolving problems with the fan not working or both fan and light not working.
Addressing serious unit vibration and poor suction performance issues.
Information on contacting assistance, including product serial number location.
Warning regarding proper earthing and potential risks of death, fire, or electrical shock.
Position and securely fix the hanging plate to the ceiling using appropriate screws.
Fix angle bars to the hanging plate and extend/fix them to the required height with overlap.
Connect the ducting hose to the ceiling adaptor and attach the upper chimney section.
Lift and securely fix the main body of the cooker hood onto the angle bars.
Connect electrical supply, check operation, adjust chimney, and fit carbon filter if needed.
Overview of standby mode, speed selection buttons (low, medium, high), and booster function.
Explanation of the function for controlling the unit's lamp.
Guidelines for general cleaning using mild soapy water and soft cloths.
Essential monthly cleaning of the grease filter to maintain efficiency and prevent fire risk.
Annual replacement of the activated carbon filter for recirculation units to trap odors.
Procedure for replacing the light bulb, noting it's sold as a complete part.
Diagnosing and resolving problems with the fan not working or both fan and light not working.
Addressing serious unit vibration and poor suction performance issues.
Information on contacting assistance, including product serial number location.
General| Brand | Hoover |
|---|---|
| Model | HDSVI985B |
| Category | Ventilation Hood |
| Language | English |
To Next Page
