Hoover HF9 - Operating Your Hoover Vacuum; Stick Mode Operation and Controls

7
To use your product in Stick mode:
1. Place your foot on the nozzle and pull back
to recline the tube.
2. Press the On/O power button to begin
cleaning.
NOTE: The nozzle LED lights are always on and
the brushbar is always rotating.
6. USING YOUR CLEANER
6.1 STICK MODE
1 2 3
If you require a deeper clean when using your
product in Stick mode, press the turbo button
to increase the power.
The turbo icon will illuminate on the LED
display to conrm your selection.
Please note this will reduce your battery
runtime.
To return to standard mode, press the turbo
button, the icon on the display will turn o.
Controls settings:
Press the MODE button to select your desired
oor surface, the LED display icon of HARD
FLOOR or CARPET will illuminate to conrm
your setting.
1 2
TURBO TURBO
MODEMODE
GB
There are 3 dierent working modes for your cleaner:
1. Stick mode.
2. Above Floor mode.
3. Handheld mode.