Hoover HL5 PUSH&LIFT - PREPARING YOUR CLEANER

P4
2. PREPARING YOUR CLEANER
STEP 1:
Fit the main product unit into
the oor nozzle.
STEP 2:
Fit the wand into the main
product unit.
STEP 4:
Fit the lower hose connector
to the main product.
STEP 5:
Fit the crevice tool to the
accessory holder.
STEP 3:
Fit the handle assembly into
the wand.
Remove all product parts from the packaging and assemble your cleaner.
IMPORTANT: Accessories included are dependant on your model. Full specication
details for your product are included on your product packaging.
CLICK
CLICK
CLICK
CLICK