EN 14
4. Oven cleaning and maintenance
4.1 General notes on cleaning
ACCESSORIES
OVENWINDOW SEAL
GLASS PARTS
It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To
remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse
with water.
If dirty, the seal canbe cleaned with a slightly damp sponge.
The lifecycle of the appliance can be extendedthrough regularcleaning. Waitfor the oven to cool before
carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for
cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based
detergents (ammonia).
DRIP PAN
After using the grill, remove the pan fromthe oven.Pour the hot fat into a container and wash the pan in
hot water, using a spongeand washing-up liquid.
Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive
detergents.
If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan
in the dishwasheror use a commercial ovendetergent. Never put a dirty pan back intothe oven.
REMOVINGAND CLEANING WIRE RACKS
1. Remove the wire racks by pulling them in the direction of the arrows (see below)
2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are
dried afterwards.
3. After the cleaning process installthe wire racksin reverse order.
4.2 Maintenance
3. Replacethe window by carrying out the procedure in reverse.
REMOVAL OF THE OVEN WINDOW
1. Open the front window.
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them
downwards.
To Next Page
Loading...
Need help?
General