Hoover HS-WP7 - Page 9

6
Attach the wall bracket:
Attaching the wall bracket with screws
1
Fully assemble the
unit and position it
against the wall
where it will
be stored.
4
Carefully remove
the unit from
the wall bracket
and use the other
screw to secure
the wall bracket
to the wall.
2
Attach the wall
bracket to the handle.
Using one of the supplied
screws,screw the wall bracket
to the wallusing the top
screw hole.
3
Wipeout 7_UG for Taiwan_090716.indd 9 9/7/2016 3:45:24 PM