7
User Controls
Quick Release Cleaning
Wand.*
Press the ‘Wand Release’
and pull out of the vacuum
for above floor cleaning.
Power ON/OFF.*
1 2
*See page 8 for location of features.
4 Level Height Adjustment Lever*
To adjust the height setting, turn the lever to the desired height setting.
For maximum cleaning performance, the following carpet height settings
are recommended:
-Hard floor setting: use for hard floors only
-Low and Medium setting: adjust depending on carpet type
-High carpet setting: for use on high pile carpets to ease pushing effort
3
• IMPORTANT•
If the vacuum is difficult to push, rotate the lever to the next higher setting.
To Next Page
Loading...
Need help?
General
