EasyManua.ls Logo

Hoover MPWR 40V User Manual

Hoover MPWR 40V
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CORDLESS UPRIGHT VACUUM
USER MANUAL
For use with model CH95519.
IMPORTANT:
READ CAREFULLY BEFORE
ASSEMBLY AND USE. THIS PRODUCT IS
INTENDED FOR COMMERCIAL USE ONLY.
Appearance of the product may differ slightly from the images depicted.

Table of Contents

Questions and Answers:

Hoover MPWR 40V Specifications

General IconGeneral
Voltage40V
Power SourceBattery
Battery TypeLithium-ion
Dust Capacity0.6 liters
FiltrationHEPA
CordlessYes
Filter TypeWashable
Charging Time4 hours
TypeStick Vacuum Cleaner

Summary

Important Safety Instructions

General Safety Warnings

Read carefully before assembly and use. Basic precautions must be followed to reduce risk of fire, electric shock, or injury.

Battery Pack Handling

Avoid exposing battery pack to water, corrosive fluids, high temperatures, or crushing.

Charger Usage Precautions

Use charger indoors only, ensure cord is not damaged, and do not handle with wet hands.

Safe Operating Practices

Do not use to pick up flammable liquids, burning materials, or in wet areas. Keep away from moving parts.

Battery Disposal Warning

Risk of explosion or exposure to toxic material. Do not disassemble, heat, or incinerate lithium-ion batteries.

MPWR 40v Battery and Charger Operation

Charging the Battery

Slide battery into charger until it clicks; LED status indicator will light up.

Charger LED Status Indicator

The charger's LED status indicator turns green when the battery is fully charged.

Battery Charge Level Indicator

Fully lit LEDs on the battery indicate the current charge level during charging.

Battery Insertion and Removal

Inserting the Battery

Insert battery into housing, grasping the handle, and push firmly until it locks.

Removing the Battery

Grasp handle, press release button, and slide battery out from housing.

Filter Bag Replacement Procedure

Opening the Bag Case

Unzip the Filtration Bag Case completely to begin replacement.

Releasing the Bag Dock

Pull the cardboard collar downward to release the bag dock from the dock port.

Removing the Old Bag

Installing the New Bag

Securing the Bag Dock

Closing the Bag Case

Brushroll Cleaning Procedure

Removing Screws

Lifting Wiper Blade

Accessing Brushroll Channel

Clearing Brushroll Debris

Reassembling Guards and Wiper

Brushroll and Belt Removal

Accessing Power Head Nozzle

Removing Brushroll and Belt

Aligning Endcaps

Inserting Brushroll

Reassembling Belt

Testing Brushroll Spin

Securing Baseplate

Clearing Vacuum Clogs

Checking Filtration Bag

Checking Power Head Nozzle

Clearing Lower Tube Blockage

Removing Lower Tube

Checking Fan Housing

Troubleshooting Guide

Charger LED Status

Vacuum Not Running

Troubleshoots issues like Auto Stop trigger, battery seating, charge level, or component damage.

Low Suction or Vacuum Won't Pick Up

Addresses filter bag issues, clogged tubes, worn belts, or brushroll problems.

Related product manuals