18
Maintenance - Clearing Clogs
5
If the lower tube is not blocked, look
into the fan housing for blockage. Be
sure to reassemble lower tube and
tighten the lower tube connector
before continuing use.
Lubrication
The motor and brushroll are equipped with bearings which contain sufcient lubrication for their
lifetime. The addition of lubricant could cause damage. Do not add lubricant to motor or brushroll.
The Belt
This vacuum is equipped with the IntelliBelt
™
Belt, which is designed for long life and doesn’t need changing.
Motor Protections
If the vacuum becomes overloaded (which could occur when a large obstruction is sucked up or
when vacuuming extremely thick carpet), the electronics are designed to shut down the vacuum. If
this happens, the vacuum will automatically shut off. To reset the vacuum, turn the unit to “O” or off,
then turn on to continue use. If it shuts down again there may be a large obstruction in the vacuum.
See Clearing Clogs for the steps on clearing a clog from the air path.
IF YOU NEED ASSISTANCE
Please call 1-888-768-2014 (Mon-Fri 8am-5pm EST) to speak with a customer
service representative; or visit our website at HooverCommercial.com.
WARNING:
WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK AND INJURY FROM MOVING
PARTS — REMOVE BATTERY BEFORE CLEANING OR SERVICING.
To Next Page
Loading...
