Hoover MPWR 40V - Getting Started

11
GETTING STARTED
1
Make sure the ltration bag
(A) is attached properly to the
ltration bag dock (B). Attachment
instructions are located on
the ltration bag and in the
maintenance section of this
manual. Your vacuum comes
with a bag preinstalled for your
convenience. Do not operate
without a bag.
2
Step on (A) power head and
pull handle back to lower into
operating position. Return handle
to full upright position to engage
lock. This product features Auto
Stop and will not operate in the
upright position by disengaging
power to the motor.
3
Push ngertip controls forward
to select “I” or Hush mode. Push
the ngertip controls all the way
forward to select “II” or Boost
mode for high trafc or heavily
soiled areas. Push the controls
backward to “O” or the off
position when the product is not
in use.
Getting Started
Please read “Important Safety Instructions” before use.
(A)
(B)
(A)