Hoover Mode User Manual

Assembly
1. Fitting or removing the flexible hose
Fitting: Insert flexible hose into the air intake duct on the top of
appliance. Press until it clicks into position.
Removing: Remove the plug from the power socket and then
release the flexible hose from the air intake duct by depressing
the two buttons.
2. Fitting the extension rods and accessories
a. Fit the extension rod to the handle, gently insert the handle
into the extension rod and push until it clicks in place.
b. Fit the floor head to the extension rod, gently insert
the extension rod into the floor head and push until
it clicks in place.
IMPORTANT! Always remove the plug from the power socket before fitting
or removing accessories.

Hoover Mode Specifications

General

Brand	Hoover
Model	Mode
Category	Vacuum Cleaner
Language	English