10
When full, the float in the dirty water tank will rise and there will be an audible change in the operating sound. Empty the dirty water tank promptly.
Continuing to clean with a full tank may impact performance.
EMPTYING THE DIRTY WATER TANK
Rinse debris from the tank lid
and float screen. Keep the filter
on the lid dry while cleaning for
optimal performance.
Empty the tank and rinse.
Use for picking up small liquid spills (one gallon or less, never to exceed 1/8” in depth).
When vacuuming liquid, make sure the product does not get submerged or doused in liquid, which could cause shock, product failure, or personal injury.
Replace lid and install tank into
body by aligning the bottom of
the tank and pushing back into
the cleaner until it clicks.
Grasp the lid by the grips
and lift.
To remove the tank, press down
on the release latch on the front
of the tank and pull the tank
away from the unit.
321
4 5
TIPS
NOTE
To Next Page
Loading...
Need help?
General
