11
CLEANING THE BRUSH ROLL AND NOZZLE
WARNING:
RISK OF PERSONAL INJURY - BRUSH ROLL MAY SUDDENLY RESTART. TURN POWER
SWITCH OFF AND REMOVE BATTERY BEFORE CLEANING OR SERVICING.
THIS PRODUCT CONTAINS NO SERVICEABLE PARTS.
IF APPLIANCE IS NOT WORKING AS IT SHOULD, HAS BEEN DROPPED, DAMAGED, LEFT OUTDOORS, OR
DROPPED INTO WATER, CALL CUSTOMER SERVICE AT 1-800-944-9200 PRIOR TO CONTINUING USE.
Run for 10-15 seconds until water is
extracted from tray. Repeat as needed until
brush roll is rinsed and debris is cleared
from nozzle. Replace the handle in the
upright position.
Recline and turn on to HIGH mode.Fill the included measuring cup with water
to max line (5 oz.). Pour water slowly into
rinse and storage tray.
Place cleaner on tray.
321
4
15
SECONDS
HIGH Mode
To Next Page
Loading...
Need help?
General
