6
Ensure that the battery is fully charged prior to use. This may take 3-4 hours to fully charge. The battery will not ship fully charged due to federal regulations.
CHARGING THE BATTERY
When charged the lights on the
battery will turn o and the light
on the charger will be solid.
When charging, the lights on the
battery will illuminate to show
the state of charge. If the light on
the charger flashes red, there is
an error with the battery or the
charger. Remove battery from
charger and try again.
During charging, the pack and ambient temperature should be between 41°F to 86°F (5°C and 30°C). The charger will sense if the pack, or ambient temperature, is too cold or too hot, and will
return an error code (red LED will be on) and not charge the pack. Use battery only with charger listed. For use with Hoover ONEPWR Lithium Ion Batteries.
To remove the battery pack from
the charger, press the latches
and pull up on the
battery pack.
Align the ribs on the ONEPWR
Battery to the grooves in the
charger. Slide the battery
pack into the charger.
Plug the charger
into a power outlet.
321
4 5
TIPS
To Next Page
Loading...
Need help?
General
