Why does my Hoover Washer not spin?
Your Hoover Washer might not spin for a few reasons. It could be that the water hasn't drained away yet, so wait a few minutes. Also, check if the ‘Spin Cancel’ option is selected. Finally, an unbalanced load can prevent spinning; try to rearrange the load evenly.
How to stop water leaking from my Hoover Otsein OH100 M7 VARIO onto the floor?
If you find water on the floor around your Hoover Washer, it could be due to a leaking gasket between the tap and water inlet hose. Try replacing the gasket and tightening the connection. Also, check for clothing or dirt between the door rubber gasket and door glass, and ensure the plumbing is correct. Keep the rubber door gasket/door glass clean.
How to fix a Hoover Otsein OH100 M7 VARIO when the water does not drain away?
If the water isn't draining from your Hoover Washer, check for a kink in the discharge hose and straighten it. Also, examine the filter for any foreign objects. Finally, verify that the machine has been plumbed in correctly.
What to do if the door of my Hoover Washer will not open?
If the door of your Hoover Washer won't open, wait two minutes after the program has finished before attempting to open it.
What to do if my Hoover Otsein OH100 M7 VARIO does not work on any programme?
If your Hoover Washer isn't working on any program, there could be several reasons. First, make sure the washer is plugged in and switched on. Check for a power failure or a blown fuse. Ensure the door is fully closed and that the RCD (trip switch) hasn't tripped. Reset the RCD if needed.
Why is my Hoover Otsein OH100 M7 VARIO vibrating so much during the spin cycle?
Excessive vibration during the spin cycle can occur if the washing machine isn't completely level. Adjust the special adjustable feet to correct this. An unevenly distributed load can also cause vibration, so rearrange the laundry. Finally, make sure you've removed the transit brackets.
What to do if my Hoover Otsein OH100 M7 VARIO does not fill with water?
If your Hoover Washer isn't filling with water, check that it's plugged in and switched on. Ensure the water supply is turned on. Also, make sure the program selector is correctly positioned.
Why does the control knob on my Hoover Washer turn a full circle quickly during a programme?
This action is normal if the knob has been moved accidentally during a cycle. No action is required.
General| Washing capacity | 7 kg |
|---|---|
| Delay Start | Yes |
| Child Lock | Yes |
| Loading type | Front |
| Display | Yes |
To Next Page