Why my Hoover H-WASH 300 LITE Washer does not work / start?
If your Hoover Washer isn't working or starting, ensure it's properly plugged into a working power socket and that the power is on. Test the wall socket with another appliance. Also, check that the door is correctly closed, and the required program is selected with the start button pressed. Make sure the washer isn't in pause or time delay mode.
Why is there water leaked on the floor near my Hoover Washing machine?
If you see water leaked on the floor near your Hoover Washing machine, it could be due to a leak from the seal between the tap, supply hose, and fill valve; in this case, replace it and correctly tighten the hose connections. Also, make sure the front filter is correctly closed.
What to do if my Hoover Washer does not spin?
If your Hoover Washer is not spinning, try these steps: First, remove the load, de-tangle it, reload it, and restart the spin program. If water hasn't completely drained, wait a few minutes. Also, some models have a "no spin" function, so ensure it's not selected. Check the selected options and their effect on the spin cycle. Finally, using too much detergent can impede the spin cycle, so ensure you're using the correct amount.
Why is my Hoover Washer making strong vibrations / noises during the spin cycle?
To address strong vibrations or noises during the spin cycle of your Hoover Washer, first, ensure the appliance is fully leveled by adjusting the feet. Next, verify that all transport screws, rubber bungs, and spacer tubes have been removed. Finally, check the drum for any foreign objects like coins or buttons.
What to do if my Hoover H-WASH 300 LITE Washer shows E7 error / 7 flashes?
If your Hoover Washer displays 'E7' or the LEDs flash 7 times, ensure the door is correctly closed and that no clothes are preventing it from fully closing. If the door is locked, turn off and unplug the washing machine, wait 2-3 minutes, and then reopen the door.
How to fix Hoover H-WASH 300 LITE Washer E2 error / 2 flashes?
If your Hoover Washer displays 'E2' or the LEDs flash 2 times, make sure the water supply tap is open and that the water supply hose isn’t bent, kinked, or trapped. Ensure the drain pipe is at the proper height. Close the water supply tap, unscrew the filler hose, and check that the “anti-sand” filter is clean and not blocked. Also, check that the filter is not clogged and that there are no foreign bodies inside the filter compartment.
What does E3 error / 3 flashes mean on Hoover Washer?
If your Hoover Washer displays 'E3' or the LEDs flash 3 times, check that the filter is not clogged and that there are no foreign bodies inside the filter compartment. Also, make sure the drain hose isn’t bent, kinked, or trapped. Ensure the home drainage system is not blocked, allowing water to flow freely; try draining water in the sink.
What to do if my Hoover Washer shows E4 error / 4 flashes?
If your Hoover Washer displays 'E4' or the LEDs flash 4 times, ensure the correct amount of detergent is being used and that the detergent is designed for use in a washing machine.
Guidelines for safe electrical connections, including earthing and socket compatibility.
Details on connecting the water supply hose, including AQUASTOP and AQUAPROTECT features.
Guide on how to check and clean the pump filter to prevent blockages.
Selecting drying degrees and using steam functions for crease reduction and refreshing laundry.
A guide to common error codes displayed by the machine and their practical solutions.
Troubleshooting common problems like no start, water leaks, no spin, and vibrations.
Details on product warranty, terms, conditions, and how to obtain assistance or spare parts.
General| Style | Front-Loading |
|---|---|
| Color | White |
| Washer Capacity | 9 kg |
| Dryer Capactity | - |
| Max Spin Speed | 1400 RPM |
| Spin Speeds | - |
| Spin Class | B |
| Number of Cycles | 15+1 |
| Cycle Selections | StainTreat |
| Wash | Cotton |
| Options | rinse hold |
| Hours | Signal On / Off Button |
| Noise level | 79 dB |
| Temperature Selections | 4 |
| Energy Class | D |
| Annual Energy Consumption | 76 kWh |
| Annual Water Consumption | - |
| Water Consumption Per Cycle | 46 L |
| Voltage | 220-240 V |
| Frequency | - |
| Current | - |
Weight and Dimensions| Depth | 530 mm |
|---|---|
| Height | 850 mm |
| Width | 600 mm |
| Net Weight | 65 kg |
To Next Page