Why my Hoover H-WASH 550 H5WPB414AMBC-S does not work / start?
If your Hoover Washer doesn't start, ensure it's plugged into a working socket, power is on, and the wall socket functions correctly by testing with another appliance. Also, check that the door is properly closed, the correct program is selected, the start button is pressed, and the machine isn't in pause or time delay mode.
What to do if water leaked on the floor near Hoover H-WASH 550 H5WPB414AMBC-S?
If you see water leaked on the floor near your Hoover Washer, it might be due to a leak from the seal between the tap, supply hose, and fill valve. In this case, replace the seal and correctly tighten the hose connections. Also, ensure that the front filter is correctly closed.
Why Hoover H-WASH 550 H5WPB414AMBC-S does not spin?
If your Hoover Washer doesn't spin, try the following: 1. Remove and de-tangle the load, then reload and restart the spin program. 2. Wait a few minutes to allow water to drain completely. If the problem continues, see Error 3 section. 3. Ensure the 'no spin' function is not selected. 4. Check the selected options and their impact on the spin cycle. 5. Use the correct amount of detergent, as excessive detergent can impede the spin cycle.
Why Hoover H-WASH 550 H5WPB414AMBC-S Washer makes strong vibrations / noises during the spin cycle?
If your Hoover Washer vibrates strongly or makes noises during the spin cycle, it might not be fully leveled. Adjust the feet as indicated. Also, ensure that the transport screws, rubber bungs, and spacer tubes were removed.
How to fix E2 error on Hoover Washer?
If your Hoover Washer displays error code E2 or the LEDs flash twice, make sure the water supply tap is open and the supply hose isn’t bent, kinked, or trapped. Ensure the drain pipe is at the proper height. Close the water supply tap, unscrew the filler hose, and clean the “anti-sand” filter. Also, check the filter for clogs or foreign objects.
What to do if Hoover H-WASH 550 H5WPB414AMBC-S shows E3 error?
If your Hoover Washer displays error code E3 or the LEDs flash three times, check the filter for clogs or foreign objects. Also, make sure the drain hose isn’t bent, kinked, or trapped, and that the home drainage system isn't blocked.
How to fix E7 error on Hoover H-WASH 550 H5WPB414AMBC-S Washer?
If your Hoover Washer displays error code E7 or the LEDs flash seven times, make sure the door is correctly closed and that clothes aren't preventing it from closing fully. If the door is locked, turn off and unplug the washing machine, wait 2-3 minutes, and reopen the door.
What to do if Hoover H-WASH 550 H5WPB414AMBC-S shows E4 error?
If your Hoover Washer displays error code E4 or the LEDs flash four times, ensure you are using the correct amount of detergent designed for washing machines.
General| Model | H-WASH 550 H5WPB414AMBC-S |
|---|---|
| Type | Front Load Washer |
| Capacity | 10 kg |
| Spin Speed | 1400 RPM |
| Energy Efficiency Class | A |
| Dimensions (HxWxD) | 850 x 600 x 540 mm |
| Weight | 70 kg |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
Connects water hose to tap; features AquaStop and Aquaprotect.
Positioning and levelling the appliance using adjustable feet.
Tips for saving money and protecting the environment when using the appliance.
Guide on checking and cleaning the pump filter for optimal draining.
Explanation of how error codes are displayed on models with or without a display.
Troubleshooting common problems like no start, water leaks, and unbalanced loads.
Information on product warranty terms, conditions, and obtaining assistance.
To Next Page