Why my Hoover H-WASH 550 5WPB414AMBC-S Washer does not work / start?
If your Hoover Washer doesn't start, ensure it's plugged into a working socket, power is on, and the wall socket functions correctly by testing with another appliance. Also, check that the door is properly closed, the correct program is selected, the start button is pressed, and the machine isn't in pause or time delay mode.
What to do if water leaked on the floor near Hoover Washer?
If you see water leaked on the floor near your Hoover Washer, it might be due to a leak from the seal between the tap, supply hose, and fill valve. In this case, replace the seal and correctly tighten the hose connections. Also, ensure that the front filter is correctly closed.
Why Hoover H-WASH 550 5WPB414AMBC-S does not spin?
If your Hoover Washer doesn't spin, try the following: 1. Remove and de-tangle the load, then reload and restart the spin program. 2. Wait a few minutes to allow water to drain completely. If the problem continues, see Error 3 section. 3. Ensure the 'no spin' function is not selected. 4. Check the selected options and their impact on the spin cycle. 5. Use the correct amount of detergent, as excessive detergent can impede the spin cycle.
Why Hoover H-WASH 550 5WPB414AMBC-S makes strong vibrations / noises during the spin cycle?
If your Hoover Washer vibrates strongly or makes noises during the spin cycle, it might not be fully leveled. Adjust the feet as indicated. Also, ensure that the transport screws, rubber bungs, and spacer tubes were removed.
How to fix E2 error on Hoover H-WASH 550 5WPB414AMBC-S Washer?
If your Hoover Washer displays error code E2 or the LEDs flash twice, make sure the water supply tap is open and the supply hose isn’t bent, kinked, or trapped. Ensure the drain pipe is at the proper height. Close the water supply tap, unscrew the filler hose, and clean the “anti-sand” filter. Also, check the filter for clogs or foreign objects.
What to do if Hoover H-WASH 550 5WPB414AMBC-S Washer shows E3 error?
If your Hoover Washer displays error code E3 or the LEDs flash three times, check the filter for clogs or foreign objects. Also, make sure the drain hose isn’t bent, kinked, or trapped, and that the home drainage system isn't blocked.
How to fix E7 error on Hoover Washer?
If your Hoover Washer displays error code E7 or the LEDs flash seven times, make sure the door is correctly closed and that clothes aren't preventing it from closing fully. If the door is locked, turn off and unplug the washing machine, wait 2-3 minutes, and reopen the door.
What to do if Hoover Washer shows E4 error?
If your Hoover Washer displays error code E4 or the LEDs flash four times, ensure you are using the correct amount of detergent designed for washing machines.
Safety instructions for electrical connections and appliance use.
Steps for removing transportation screws and using packaging materials during installation.
Guide for connecting water hoses, including specific features like AquaStop.
Instructions for positioning the appliance and levelling it using adjustable feet.
Details on detergent drawer compartments and automatic liquid dosing systems.
Tips on sorting laundry, loading the machine, and handling heavy items like rugs and wool.
Guidance on maximizing load size, avoiding pre-wash, and using low-temperature washes.
Advice on selecting and using the correct amount of detergent for optimal results and environmental impact.
Instructions for cleaning the appliance exterior and the detergent drawer.
Procedure for checking and cleaning the pump filter to prevent blockages.
Guidelines for preparing the machine for moves or prolonged periods of non-use.
Step-by-step guide for opening the porthole in case of power shortage or faults.
Instructions for connecting the appliance to the network and pairing it with the mobile app.
Steps to activate or deactivate remote control functionality via the app.
Overview of selecting programs, adjusting settings, and starting the wash cycle.
Key technical data such as water pressure and power input.
Details on programme selector, initial setup, language, program start, START/PAUSE, and temperature.
How to adjust spin speed, set delay start, use steam, and select wash options.
Details on Extra Rinse, Hygiene+, Eco Doser, drum cleaning, and program-specific buttons.
Explanation of digital display, indicator lights for Wi-Fi, Eco Doser, safety features, and connectivity.
Detailed table showing programs, load capacity, temperature, and options.
Information on standard programs for test laboratories according to EU regulations.
Detailed descriptions of various wash programs like Cottons, Eco 40-60, and Rapid Care.
List of error codes and their corresponding causes and solutions for common issues.
Troubleshooting tips for common problems like machine not starting or water leakage.
Details on the product warranty coverage and conditions.
To Next Page
General