11.
4. Turn the filter cone anti-clockwise to clean.
5. Hold the dust bin over a rubbish bin and press the Dust Release
Button to empty the dust bin.
Caution: To avoid damaging the dust bin remove the dust bin
from the cleaner before cleaning or replacing the dust bin
lter.
1. Turn the dust bin lid to access the Pre-Motor filter.
2. The filter can be cleaned using lukewarm water. Alternatively, the
filter can be replaced with a new filter.
Caution: Ensure that the lter is dry before reinstalling back
into the cleaner.
Note: It is recommended to replace the lter every 6 months
or when it becomes visibly dirty.
Please contact Godfreys customer support and service hotline
Australia on 1800 815 270 or New Zealand on 0800 282 288 to find your
local spare parts provider.
Cleaning and Replacing the Pre-Motor Filter
IMPORTANT! Before carrying out any maintenance service or
cleaning the lters. Always switch off the wall outlet, vacuum
cleaner and then disconnect the plug from power supply.
Maintenance
To Next Page
Loading...
Need help?
General
