7.
Safety Precautions & Assembly
WARNING! Always switch off the cleaner before tting or removing accessories.
Assembling the vacuum cleaner
Assembly
1. Insert the flexible hose into the hose inlet of the vacuum. Press until it
clicks into position.
Remove by pressing the two buttons and gently pull to release the
flexible hose.
3. Place the turbo head onto the floor and gently insert the
telescopic tube into the turbo head. Push until it is locked into
place.
2. Gently insert the handle into the telescopic tube and push until it is
locked into place.
To Next Page
Loading...
Need help?
General
