10.
Maintenance
IMPORTANT! Before carrying out any maintenance service or
cleaning the lters. Always switch off the wall outlet, vacuum
cleaner and then disconnect the plug from power supply.
Vacuum Cleaner Storage
When not in use, ensure that the cleaner is disconnected from to the power supply and that the cable is
fully retracted.
1. Press the Dust Bin Release Button to remove the dust bin from the
cleaner.
Note: the dust bin should be emptied before dust and debris
reaches the “MAX” line.
2. Hold the dust bin over a rubbish bin and press the Dust Release Button
to empty the dust bin.
3. Turn dust bin lid anti-clockwise to open.
Emptying the Dust Bin
To Next Page
Loading...
Need help?
General
