EasyManua.ls Logo

Hoover POWER PATH PRO Advanced - Finishing Touches and Cautions

Hoover POWER PATH PRO Advanced
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
For best cleaning results, end with more
dry strokes. (Continue using dry strokes
until little water is visible passing through
the nozzle.)
NOTE: Empty Dirty Water Tank when the
motor sound becomes higher pitched and
there is a loss in suction (see “Automatic
shut-off”).
For best results, Hoover
®
recommends
rinsing carpet with water only. This
removes residual carpet cleaning solution.
Fill Clean Water, then turn knob to rinse
mode and repeat. For heavily soiled
areas, repeat. Avoid saturating carpet.
NOTE: It is best to alternate wet and dry
strokes as described above.
CAUTION
Do not clean over oor electrical outlets. Water
will drip from the brushes and underside of the
product after use and may puddle. To avoid
damage to wood and laminate ooring and
to avoid potential slip hazard, after use (a) do
not leave the product on wood and laminate
surfaces and move to a hard surface and (b)
place unit on an absorbant material
(such as a towel) to soak up drips.
!!

Related product manuals