Hoover POWER PATH PRO Advanced - Emptying the Dirty Water Tank; Tank Removal and Emptying Steps

9
1
4
2 3
Grasp Dirty Water
Tank handle and
push latch to release.
Pull tank out at an
angle like this.
Replace lid by lining up
the hinge and pulling
latch down to lock. Latch
will line up with hinge and
snap when secured.
Empty the Dirty Water
Tank by pulling up on
the latch at the back
of the tank to open.
Remove lid and
empty tank.
WARNING
To reduce the risk of personal injury -
Unplug before cleaning or servicing.
!!
Emptying your Power Path
™
Pro dirty water tank: