Hoover POWER PATH PRO Advanced - Connecting and Using Accessory Hoses

13
1 2 3
Open Accessory Hose Suction
Port at the bottom of the Dirty
Water Tank.
Insert hose end connector
by inserting rmly into
Suction Port.
Press the button on the
end of hose and pull
the hose and solution
connection from machine
to remove.
Close Accessory Hose
Suction Port door back
into place. Make sure
to close door to ensure
proper suction.
Using your Power Path
™
Pro tools:
NOTE: Upholstery and
SpinScrub Powered
Hand Tool attach to the
hose in the same manner.
NOTE: Spot Treater Wand
attachment is the same
process as attaching
hose to the unit.