Hoover REACT BH53220 - Filter, Separator Cleaning; Cleaning Filter and Separator

20
Maintenance: Cleaning the Filter, Dirt Cup and Separator

cup release button and pull the dirt
cup away.
To clean the separator, lift to remove. Clean
dirt & debris, then place back into dirt cup.


under warm water until water is clear.

completely dry before reinstalling.
To reassemble, align the hook to the

until it locks in place.
1
3
2
4
WARNING
To reduce the risk of personal injury, remove battery
before maintaining or servicing your vacuum.
IMPORTANT
DO NOT USE SOAP OR OTHER CHEMICALS TO CLEAN. DRY FILTER COMPLETELY,
FOR UP TO 24 HOURS, BEFORE REINSTALLING INTO THE PRODUCT.