9
Mounting the Wall Bracket
First, fully assemble the vacuum but do not attach the battery.
Set the vacuum aside. Mark the
Wall Anchor locations. Install
the anchors and screw the Wall
Bracket to the wall.
IMPORTANT: Use BOTH screws to
mount the Wall Bracket to wall.
Install the Wall Bracket arm
to the Wall Bracket. Hold the
vacuum against the wall.
behind the Handheld so that
the hook holds the vacuum.
TIP: The Floor Nozzle must be at
on the ground for proper wall
mounting.
slot on the Wall Mount Bracket
until it locks into place.
1 32
To Next Page
Loading...
Need help?
General
