What to do if my Hoover SE 160E does not spin?
If your Hoover Washer isn't spinning, it could be due to a few reasons. The water might not have drained away yet; wait a few minutes for the machine to empty. The ‘Spin Cancel’ option might be selected, so check that setting. Also, an unbalanced load can prevent spinning, so rearrange the load evenly.
How to fix Hoover SE 160E Washer that vibrates a lot during spin?
If your Hoover Washer vibrates excessively during the spin cycle: 1. The washing machine may not be completely level, adjust the special adjustable feet. 2. The load may not be distributed evenly, rearrange the laundry evenly. 3. Transit brackets may not have been removed, remove transit brackets.
What to do if water does not drain away from Hoover SE 160E?
If water isn't draining from your Hoover Washer, it could be due to a kink in the discharge hose; straighten the discharge hose. Foreign bodies in the filter could also be the problem; examine the filter. Also, the machine might have been plumbed in incorrectly; check the installation.
What to do if Hoover Washer door will not open?
Wait two minutes, the door should open.
Why my Hoover SE 160E does not work on any programme?
Your Hoover Washer might not be working due to several reasons: it might not be plugged in, so plug it in. It may not be switched on, so switch it on. There could be a power failure, so check the power supply. The fuse might have blown, so check the fuse. The door could be open, so close the door. Finally, the RCD might have tripped, so reset the RCD.
Why Hoover SE 160E Washer does not fill with water?
If your Hoover Washer isn't filling with water, check a few things. Ensure the water supply is turned on. Also, make sure the programme selector is correctly positioned. Check if anything is preventing water from entering.
How to stop water on floor around Hoover Washing machine?
If you find water on the floor around your Hoover washing machine, it could be due to a leaking gasket between the tap and water inlet hose; replace the gasket and tighten the connection. It might also be caused by a strand of clothing or dirt between the door rubber gasket and door glass; reload the machine and keep the rubber door gasket/door glass clean. Incorrect plumbing could also be the cause; check the plumbing.
Why does the control knob turn a full circle quickly during a programme on my Hoover SE 160E?
This action is normal if the knob has been moved accidentally during a cycle. The control knob was not in the expected position when automatically checked by the machine.
Tips for optimizing energy, water, and detergent consumption by loading the machine correctly.
How to start, pause, and resume wash cycles using the START/PAUSE button.
Instructions for pausing a wash cycle and resuming it.
Procedure for cancelling an ongoing wash programme.
Information about the door lock mechanism and safe door opening after a cycle.
How to select wash programmes using the programme selector knob.
How to use the detergent drawer compartments for different types of washing agents.
Guide to selecting suitable detergents based on fabric type and soiling level.
Guidelines on how much detergent to use based on water hardness and soiling.
Guidance on adding detergent and other aids to the correct compartments.
How to choose and start the appropriate wash programme.
Instructions for cleaning the machine's filter to prevent blockages.
Procedure for draining water from the machine during a power failure.
Details of the product guarantee terms and conditions.
To Next Page
General