Hoover HWE 410AMBS/1-S User Manual (English)

Questions and Answers:

T
Tammy SaundersAug 12, 2025
Why my Hoover HWE 410AMBS/1-S Washer does not start?
- M
  Misty MillerAug 12, 2025
  If your Hoover Washer isn't starting, there are several things to check: * Ensure the washer is plugged into a working electrical outlet and that the power is on. * Test the outlet with another appliance to confirm it's functioning. * Make sure the door is completely closed. * Verify that you've correctly selected a program and pressed the start button. * Confirm the washer isn't in pause or time delay mode.
T
travisgonzalezAug 16, 2025
What to do if my Hoover HWE 410AMBS/1-S Washer does not drain water?
- S
  Samantha SmithAug 16, 2025
  If your Hoover Washer isn't draining, try the following: * Check the filter for clogs or foreign objects. * Ensure the drain hose isn't bent, kinked, or trapped. * Make sure your home drainage system isn't blocked by trying to drain the water in the sink.
C
Cindy ShafferAug 19, 2025
How to fix Hoover HWE 410AMBS/1-S Washer that cannot load water?
- G
  Gregory AndersonAug 19, 2025
  If your Hoover Washer isn't loading water, try these solutions: * Ensure the water supply tap is fully open. * Check that the water supply hose isn’t bent, kinked, or trapped. * Confirm the drain pipe is at the correct height. * Inspect the “anti-sand” filter for blockages after closing the water supply tap and unscrewing the filler hose. * Check the filter for clogs or foreign objects.
A
Angela AyersAug 23, 2025
Why Hoover Washer does not spin?
- S
  Sara GrayAug 23, 2025
  If your Hoover Washer isn't spinning, consider these potential solutions: * If the load is unbalanced, remove it, detangle the items, reload, and restart the spin program. This is because the washer has a detection system that protects the load and product from damage. * Make sure a 'no spin' function isn't selected. * Check the selected options and their impact on the spin cycle. * Too much detergent can also prevent spinning, so ensure you're using the correct amount.
B
butlermelissaAug 27, 2025
How to reduce vibrations from Hoover Washer during spin cycle?
- F
  Felicia GriffithAug 27, 2025
  If your Hoover Washer is vibrating strongly or making excessive noise during the spin cycle: * Ensure the washing machine is fully leveled; adjust the feet if needed. * Also, make sure the transport screws, rubber bungs, and spacer tubes were removed during installation.
N
Nancy ElliottAug 31, 2025
What to do if I have door problem with Hoover Washer?
- B
  Brenda ScottAug 31, 2025
  If you're having door issues with your Hoover Washer: * Ensure the door is correctly closed and that no clothes are preventing it from fully closing. * If the door is locked, turn off and unplug the washer, wait 2-3 minutes, and then try reopening the door.
Z
Zachary MackSep 3, 2025
What causes water to leak from my Hoover HWE 410AMBS/1-S Washer?
- X
  Xavier CastroSep 4, 2025
  If water is leaking on the floor near your Hoover Washer, ensure the front filter is correctly closed. Also, if the leak is from the seal between the tap, supply hose, and fill valve, replace the seal and tighten the hose connections.
D
David RobinsonSep 7, 2025
Why is there too much foam in my Hoover Washer?
- K
  Karen VillanuevaSep 7, 2025
  If there's excessive foam or water in your Hoover Washer, make sure you're using the correct amount of detergent and that it's designed for washing machines.

Hoover HWE 410AMBS/1-S Specifications

General

Type	Freestanding
Loading type	Front loading
Capacity	10 kg
Spin Speed	1400 rpm
Energy Efficiency Class	A
Dimensions (HxWxD)	85 x 60 x 58 cm
Weight	66 kg
Spin-drying class	B
Noise level (spinning)	77 dB
Color	White
Delay Start	Yes
Child Lock	Yes
Display	Digital
Noise Level (Washing/Spinning)	51 dB / 77 dB
Programs	Cotton, Synthetics, Wool, Delicate
Water Consumption	50 L
Water consumption per cycle	51 liters