Hoover SMARTWASH+ - Getting Started With Your SmartWash Carpet

10
Getting Started With Your SmartWash Carpet
Assembly
Fill the Solution Tank
Fill the Clean Water Tank
Slide the handle into the
base until you hear a
“click”.
1
Wrap the power cord
around the cord hooks
for convenient storage.
2
2
Remove the cap and add
warm water to the top of
tank. Replace cap.
2
Remove the cap and ll
with HOOVER® Cleaning
Solution to the top of
the tank. Replace cap.
Remove the Solution
Tank from the back of
the cleaner.
1
Place the Solution Tank
back into the cleaner
and press FIRMLY into
place.
3
Align Clean Water
Tank with the body of
the cleaner and press
FIRMLY into place.
3
Lift up to remove the
Clean Water Tank.
1
Fully assemble before operating.
IMPORTANT:
Screw the solution tank cap tightly when refitting. Do not
leave the solution stored in the tanks between uses.
Unused solution can be poured back into the bottle.