13
Maintenance
How to Empty
Turn the cleaner off and
unplug from electrical
outlet.
1
2
4
3
Grab the Dirty Water
Tank handle and pull up
to release. Remove Tank
from carpet cleaner base
at an angle.
Empty tank, rinse, wipe
lter clean and allow to
air dry.
Place on a at surface
and unlatch Dirty Water
Tank lid to remove top
Auto Shut Off Float: Your carpet cleaner is equipped with a shut o oat within your Dirty Water Tank. When the Dirty Water Tank
becomes full, the oat will rise, shutting o the air ow through the Nozzle. Once the air ow is shut o, empty the Dirty Water Tank.
Keeping the filter clean is
critical to maintain strong
suction performance.
This product contains no serviceable parts.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call customer service at 1300 698 130
To Next Page
Loading...
