Why Hoover VHD 616 ZI does not spin?
If your Hoover Washer isn't spinning, here are a few potential reasons: * The water may not have completely drained yet - allow a few minutes for the machine to empty. * The ‘Spin Cancel’ option might be selected (on certain models) - check if this option is enabled. * The load inside might be unbalanced - try to rearrange the load evenly.
How to fix Hoover Washer when water does not drain away?
If the water isn't draining from your Hoover Washer, consider the following: * Check for any kinks in the discharge hose and straighten it out. * Inspect the filter for any foreign objects. * Verify the machine has been plumbed in correctly by checking the installation.
Why is there water on floor around the water inlet hose of my Hoover VHD 616 ZI?
If you find water around the inlet hose of your Hoover Washer, it could be due to: * A leaking gasket between the tap and washing machine - replace the gasket and tighten the connection. * A strand of clothing or dirt between the gasket and door glass - reload the machine and keep the rubber door gasket/door glass clean. * Incorrect plumbing - check the plumbing.
Why Hoover Washer does not work on any programme?
If your Hoover Washer isn't working on any program, several things could be the cause: * There might be a power failure. You can check the 'Power Failure' section for more details. * A fuse might have blown - check the fuse. * The door might not be closed properly - close the door. * The RCD (trip switch) might have tripped - reset the RCD. * The delay start function may have been activated - check the settings.
What to do if my Hoover Washer does not fill with water?
If your Hoover Washer isn't filling with water, the possible reasons are: * The water supply might be turned off - turn on the water supply. * The program selector may not be correctly positioned - make sure it is properly set.
Why does my Hoover VHD 616 ZI vibrate a lot?
Excessive vibration in your Hoover Washer can be due to: * The washing machine not being completely level - adjust the special adjustable feet. * An unevenly distributed load - rearrange the laundry evenly. * The transit brackets not being removed - remove the transit brackets (see installation section).
What does error 3 mean on Hoover VHD 616 ZI?
If your Hoover Washer displays error 3, it indicates a pump out issue. Check that the drain is clear and the drain hose is not kinked.
What does error 2 mean on Hoover VHD 616 ZI display?
If your Hoover Washer displays error 2, it means there is no water fill. Check that the water supplies are turned on.
General| Loading type | Front loading |
|---|---|
| Maximum spin speed | 1600 RPM |
| Washing capacity | 6 kg |
| Capacity | 6 kg |
| Energy Efficiency Class | A |
| Spin Speed | 1600 RPM |
| Noise Level (Washing) | 58 dB |
| Weight | 68 kg |
| Color | White |
Information on how to correctly dispose of packaging materials and the appliance at the end of its lifespan.
Verifying appliance contents on delivery and adhering to crucial safety guidelines during operation.
Step-by-step instructions to initiate a wash cycle and manage its completion.
Guide to setting the display language and adjusting time settings on the Inter@ct control panel.
How to set the current time and choose between Absolute and Relative time modes for program scheduling.
Options for enabling final beep alerts and remembering previous wash programs for convenience.
Instructions on setting demo mode and exiting the menu after configuration is complete.
A table detailing programs for different fabric types, including settings and detergent charge.
A checklist of common washing machine problems, their causes, and recommended remedies.
Information on how to contact GIAS Service and what details to provide.
Detailed steps for removing transit packaging, covering holes, and leveling the machine.
Requirements for electrical connection, earthing, and safety advice for appliance operation.
To Next Page