Hoover WH10100 User Manual

5
1. set-uP & How to use
ProduCt desCriPtion
BACK/FRONT
1. Rear Grille
2. Rinsable Pre-Filter
3. Replaceable Filter made with HEPA Media*
1
1.1
CONTROL PANEL
4. Ionizer
5. 2/4/8 Hour Timer
6. Filter made with HEPA Media Replacement
Indicator
7. 3 Speed Fan Control
8. Filter Reset
set-uP
- Remove the air purifier from its packaging.
BACK FRONT
CONTROL PANEL
2
3
4
5
7
6
*HEPA media traps 99.97% dust and pollens down to 0.3
microns
IMPORTANT
Place the unit on a flat, stable surface with
adequate ventilation.
- Plug the unit into an AC outlet.
- Press the POWER button.
- Adjust the Air Cleaning Power with the “+” and “-“
buttons. The unit has 3 Air Cleaning Power
settings, and an LED will indicate which setting is
in operation.
- Press the “ION” button to toggle on/off. The
button will illuminate with an amber light when the
ION mode has been activated.
- Press the TIMER button to set the timer to 2
hours/4 hours/8 hours/OFF (hours indicated
with LEDs).
8

Hoover WH10100 Specifications

General

Timer	Yes
Air purify rate	- m³/h
Suitable for room volume up to	- m³
Product color	Black