24
Clearing blockages
1
2 3 4
If there is an obstruction to
the steam flow through the
machine, steam may release
through the bleed valve.
To remove the floor head from
the body push the floor head
release button and lift.
After the floor head is removed,
use a thin object such as a
paper-clip (in the area shown),
to remove the blockage.
With the pad removed from the
floor head, insert a small thin
object such as a paper-clip in
to the steam holes to remove a
blockage.
WARNING: To reduce the risk of personal injury -
Unplug Steam Cleaner before servicing and allow to cool.
To Next Page
Loading...
Need help?
General
