Hoover WH20540CDI - Cord Management; Storing the Power Cord; Microfiber Pad Setup; Attaching the Cleaning Pad

5
Cord storage Attach microfiber pad
Wrap cord around release
hooks for convenient
storage. Attach the plug
end to the cord.
Place the cleaning pad on the floor white side
facing up. Place steam cleaner on top of pad
making sure the Floor Head covers the entire pad.
Hook and loop feature on the bottom of the mop
will hold the pad in place.
1
1
The “Multi-Surface Microfiber Pad” can
be used on all sealed hard floor surfaces
as well as carpet. When using on carpet
the carpet glider attachment should be
utilized as directed in the “Refreshing
Carpet” section of this manual.
WARNING: To reduce the risk of
personal injury - Unplug the steam
cleaner when assembling the
accessories.
IMPORTANT: Never use the
Steam Cleaner without the Microfiber
Pad correctly attached to the Floor
Head.