3
1. Assembling cleaner
This cleaner was inspected and packaged carefully before being shipped from the factory. If you
should happen to need assistance during assembly or operation, call:
1-800-944-9200 for an automated referral of service outlet locations (U.S. only) OR
1-330-499-9499 to speak with a representative in our Consumer Response Center OR
Visit us on-line at www.hoover.com to find the service outlet nearest you (click
on the “Service” button).
C a rton contents
Remove all parts from carton and identify each item shown. Make
sure all parts are located before disposing of packing.
A. Handle section
B. Cleaner body
C. Hose, cleaning tools and wands
(packed on cleaner)
D. Powered hand tool (some models)
1-1
A
D
C
Note: The white switch lock above the ON/OFF switch aids in
the assembly of your cleaner. Assembly can be continued if
the switch lock is missing. However, do not remove the switch
lock until assembly is completed.
B
Continued ➜
To Next Page
Loading...
Need help?
General
