7
Cleaning the cylonic unit
If necessary the cyclone unit can be removed from the cyclonic cassette and cleaned.
Remove dust container from the cleaner by releasing the container carry handle to 1.
[8,9]
-2.
tainer. [16]
Using the bin handle lift the bin upper section containing the cyclonic unit from the 3.
[17]
Use a cloth to remove excessive dust from the cyclone unit’s surface. 4. [18]
5.
Push clips back to fully close the bin. [19]
6.
-
Removing a blockage
Check if the dust container is full. If so refer to ‘Emptying the dust container.1.
2.
A.
Check if there is any other blockage in the system - Use a rod or pole to remove B.
C.
Check if the cyclonic unit needs to be cleaned. Refer to ‘Cleaning the cyclone D.
unit’
USER CHECKLIST
before calling your local Hoover service.
electrical appliance.
system’.
-
matically reset.
IMPORTANT INFORMATION
Hoover spares and Consumables
-
number.
Hepa / Micro Filter pack: U46 - 35600814
Carpet & Floor Nozzle: G72 - 04845090
Allergen Remover Turbo Nozzle: J31 - 35600816
Allergen Remover Mini Turbo Nozzle: J32 - 35600817
Flexible Hose: D101 - 35600815
Caresse Nozzle: G90PC - 35600660
Hoover Service
Quality, Safety and the Environment
Safety
-
UK national authority for the safety of domestic electrical appliances, ensures that Euro-
pean safety standards are met and maintained throughout the production life of an appli-
safety.
Quality
BSI ISO 9001
GB
To Next Page
Loading...
Need help?
General
