Save
OR
Yes
No
15
Programming Remote to Control
Another Device, continued
Scanning the Remote Database,
continued
Using the remote, turn
the device on and try
some other remote
buttons to make sure
they work. When
nished, press and
release SAT to switch
modes.
If the code worked for
other buttons, select Yes
and continue to step 11.
If the code did not work,
select No and repeat
steps 6 through 10 for
the next code for the
brand of your device.
On the Remote Manager
screen, conrm that the
device’s brand name is in
parentheses after a four-
digit code. Select Save.
10
11
To Next Page
Loading...
Need help?
General