EasyManua.ls Logo

HORI Poke Ball Plus - User Manual

HORI Poke Ball Plus
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
When it is difficult to attach, press on
the 4 clip areas while pushing down on
the top and bottom cover.
Included
Platform
How to Install
To Parental guardians:Please be sure to read
Caution
● Small parts. Keep this product out of the reach of children under 3.
Seek medical advice immediately if swallowed.
● Do not place it within the reach of infants.
● Do not use excessive force to remove as it may damage the product.
● Do not store if product is covered in dust or dirt.
● Keep the controller away from dusty or humid areas.
● Do not leave in direct sunlight or a hot place for an extended period of time.
● Direct sunlight may cause discoloration. Be cautious of where you store the product.
● Do not use in close proximity of fire.
● Use diluted neutral detergent to clean this product.
Dry it completely before using the product again.
● Do not use any chemical agents like benzine or thinner.
● This product is not water proof.
Do not get the Poké Ball Plus wet while this product is attached.
● Do not bump, drop, or roughly handle this product.
● Do not use this product if damaged or altered.
● Never disassemble, repair or modify this product.
● This product is not made to protect the Poké Ball Plus from impact.
● Do not use this product for anything other than its intended use.
● HORI is not responsible for any damages or data loss due to mishandling of the product.
Bottom
Cover x 1
Poké Ball Plus
Attachment
Cover x 1
Pouch x 1 Instruction manual x 1
Top Cover
x 1
Instruction Manual
Thank you for purchasing this product.
Before using this product please read the instructions carefully.
After reading the instruction manual, please keep it for reference.
Recommendedage:6yearsandover
The image on the package may differ from the actual product.
The manufacturer has the right to change the spec of the product without any notification.
● “Pokémon," "Poké Ball" are registered trademarks or trademarks of Nintendo, Creatures, and Game Freak.
All rights reserved. All other trademarks are the property of their respective owners.
Manufactured and distributed under license from Nintendo.
● “ ”and“ ”are registered trademarks of HORI.
©2018 Pokémon. ©1995-2018 Nintendo/Creatures Inc. /GAME FREAK inc.
Please read carefully
Follow this guide
to attach accordingly
Align the Poké Ball Plus accordingly.
Align the hole and clip position to attach the top cover.
Be cautious of the angle.
The hole position
does not match
Not horizontally
aligned
Port cover
is blocked
<Front> <Back><Side>
Poké Ball Plus Placement:
● Center the stick to the hole in th e cover
● Horizontally align the black line to the cover
● Insert so the port cover can be opened and closed
Stick
Port Cover
Attachment Cover
Bottom Cover
Top Cover
clip areas
You do not have to attach the attachment cover if you are using
the Poke Ball Plus Charge Stand (sold separately).
Attachment complete
Attach the attachment cover to the inside of the bottom cover.
Question and Answer IconNeed help?

Do you have a question about the HORI Poke Ball Plus and is the answer not in the manual?

Summary

Safety and Usage Guidelines

Please Read Carefully

Follow this guide to attach accordingly. Read instructions before use.

Parental Guidance and Precautions

Essential safety warnings for guardians regarding small parts, environment, and proper use.

Product Components

Included Accessories

Lists the components provided: Top Cover, Attachment Cover, Pouch, Bottom Cover.

Platform: Poké Ball Plus

Details about the core product, including trademark information.

How to Install Attachment

Attach Attachment Cover

Instructions for attaching the cover to the inside of the bottom cover.

Align Poké Ball Plus

Guidance on correctly positioning the Poké Ball Plus on the attachment.

Attach Top Cover

Steps to align and clip the top cover onto the assembled unit.

How to Remove Attachment

Initial Removal Steps

Instructions for detaching the attachment cover from the Poké Ball Plus.

Difficult Removal Assistance

Tips for removing the cover when it is difficult, including grip points.

Overview

The HORI Poké Ball Plus accessory is a protective cover designed for the Nintendo Poké Ball Plus controller, suitable for users aged 6 years and over. This product aims to enhance the user experience by providing protection and a secure fit for the Poké Ball Plus, while also offering guidance on proper installation and removal.

Function Description:

The primary function of this product is to serve as a protective casing for the Poké Ball Plus controller. It consists of a Top Cover, an Attachment Cover, and a Bottom Cover, which, when assembled, enclose the Poké Ball Plus. The design ensures that the controller is securely held within the casing, preventing accidental damage from minor impacts or everyday handling. The Attachment Cover is an optional component; users who utilize the separately sold Poké Ball Plus Charge Stand do not need to attach it. The product is not designed to protect the Poké Ball Plus from significant impact, nor is it waterproof.

Important Technical Specifications:

The product includes the following components:

  • Top Cover: 1 unit
  • Attachment Cover: 1 unit
  • Bottom Cover: 1 unit
  • Pouch: 1 unit
  • Instruction Manual: 1 unit

The product is manufactured and distributed under license from Nintendo, with all rights reserved for Pokémon, Poké Ball, Nintendo, Creatures Inc., Game Freak, and HORI. The manufacturer reserves the right to change product specifications without prior notification.

Usage Features:

Installation:

  1. Attach the Attachment Cover: The Attachment Cover is first attached to the inside of the Bottom Cover. This step is crucial for users not employing the Poké Ball Plus Charge Stand.
  2. Align the Poké Ball Plus: The Poké Ball Plus controller must be carefully aligned within the Bottom Cover. Specific alignment instructions include:
    • Centering the stick of the Poké Ball Plus to the designated hole in the cover.
    • Horizontally aligning the black line on the Poké Ball Plus with the cover.
    • Ensuring the Poké Ball Plus is inserted in a way that allows the port cover to be easily opened and closed. Incorrect alignment (e.g., stick not centered, not horizontally aligned, or port cover blocked) will prevent proper assembly.
  3. Attach the Top Cover: Once the Poké Ball Plus is correctly positioned in the Bottom Cover, the Top Cover is aligned with the hole and clip positions.
    • To secure the Top Cover, press down on the four clip areas while simultaneously pushing down on both the Top and Bottom Covers. This action ensures a firm and complete attachment.

Removal:

  1. Access the Opening: To begin the removal process, place a finger on the opening of the attachment cover.
  2. Detach Covers: Gently detach the upper and lower covers.
  3. Difficult Removal (Alternative Method): If the covers are difficult to remove, squeeze the four clip areas simultaneously to release the top and bottom covers.
  4. Individual Clip Release: For further assistance, lift the attachment cover opening outward and individually remove the clips to detach the top cover.

Maintenance Features:

  • Cleaning: The product can be cleaned using a diluted neutral detergent. After cleaning, it must be dried completely before being used again.
  • Avoid Harsh Chemicals: Do not use chemical agents such as benzine or thinner for cleaning, as these can damage the product.
  • Water Exposure: The product is not waterproof. Avoid getting the Poké Ball Plus wet while it is attached to this product.
  • Storage:
    • Store the product away from dusty or humid areas.
    • Do not leave it in direct sunlight or hot places for extended periods, as direct sunlight can cause discoloration.
    • Do not store the product if it is covered in dust or dirt.
  • Handling:
    • Avoid bumping, dropping, or roughly handling the product.
    • Do not use excessive force when attaching or removing components, as this may damage the product.
    • Never disassemble, repair, or modify the product.
    • Keep the product out of reach of children under 3 years old due to small parts. Seek medical advice immediately if swallowed.
    • Do not place it within the reach of infants.
    • Be cautious when removing the cover with long nails to avoid scratches.
    • If the cover comes off due to pulling hard on the strap, reattach it carefully.
  • Damage: Do not use the product if it is damaged or altered. HORI is not responsible for any damages or data loss resulting from mishandling of the product.
  • Intended Use: This product is exclusively designed for its intended use as a protective cover for the Poké Ball Plus. It should not be used for any other purpose.

HORI Poke Ball Plus Specifications

General IconGeneral
BrandHORI
ModelPoke Ball Plus
CategoryVideo Game Controller
LanguageEnglish

Related product manuals