Horizon Hobby Carbon-Z Cessna 150 User Manual (English)

Questions and Answers:

J
Jerry ChangAug 2, 2025
Why does my Horizon Hobby Carbon-Z Cessna 150 Toy have oscillation?
- J
  James SingletonAug 2, 2025
  If your Horizon Hobby Toy experiences oscillation, several factors could be responsible. It might be due to a damaged propeller or spinner, in which case you should replace them. Alternatively, the propeller might be imbalanced and needs balancing. Motor vibration could also cause oscillation, requiring part replacement or alignment and tightening of fasteners. Other potential causes include a loose receiver (align and secure it), loose aircraft controls (tighten or secure the parts), worn parts (replace them), or irregular servo movement (replace the servo).
R
Ronnie RosarioAug 11, 2025
What to do if my Horizon Hobby Carbon-Z Cessna 150 has inconsistent flight performance?
- J
  Joshua GreerAug 11, 2025
  If your Horizon Hobby Toy has inconsistent flight performance, check the trim and ensure it's at neutral. If you've adjusted the trim by more than 8 clicks, adjust the clevis to remove trim. Also, ensure that no sub-trim is used; instead, adjust the servo linkage. Another potential cause is movement of the aircraft immediately after connecting the battery. To resolve this, disconnect and reconnect the battery with the throttle stick in the lowest position, then keep the aircraft still for 5 seconds.
A
Amy RichardsonAug 21, 2025
What to do if Horizon Hobby Carbon-Z Cessna 150 Toy has incorrect response to the AS3X Control Direction Test?
- C
  christine24Aug 21, 2025
  If your Horizon Hobby Toy shows an incorrect response to the AS3X Control Direction Test, do not fly it. This issue is due to incorrect direction settings in the receiver, which could lead to a crash. Correct the direction settings by referring to the receiver manual before attempting to fly.